FRONT SPRING ASSEMBLY AND BUSHINGS REPLACEMENT (Cont).
Tighten stabilizer bar bolt (25) to
230 Ib.-ft. (312 N.m).
Remove jack from axle (1).
If removed, install plastic shield to
rear of fender skirt on left side. (See
paragraph 10-6) If lowered, raise
right exhaust pipe to its original
position and connect to right exhaust
manifold. (See TM 9-2320-289-20) If
transmission was shifted to L
(Low), shift to P (Park).
l Install wheel. (See TM 9-2320-289-20)
l Remove jack stands and lower truck.
l Road test truck and check torque of U bolt fasteners.