TM 9-2320-289-34
6-15.1. REAR AXLE DIFFERENTIAL MAINTENANCE (M1028A2) (Cont).
8 .
9.
NOTE
l If ring gear (12) and side bearings (10) were not removed, go to
subparagraph e.
l Ensure that ring gear (12) is assembled as marked.
Install ring gear (12) to differential
case (8), if removed, with 12 ring gear
bolts (13). Tighten bolts alternately to
120 Ib.-ft. (163 N.m).
NOTE
Side bearings (10) should rotate
freely once installed.
Install original shims (11) under each
side bearing (10) as tagged, using
arbor press.
e .
INSTALLATION
1 .
Install 2 new preformed packings (9)
inside axle housing side bores.
6-103.8
Change 1