6-15.1. REAR AXLE DIFFERENTIAL MAINTENANCE (M1028A2) (Cont).
Tightly hold differential case (8) assembly
pressure until 2 or more differential case bolts
together to absorb spring
(19) are installed. Failure to
follow this warning may result in injury to personnel or damage to
differential case assembly components.
l Ensure that differential case (8) is assembled as marked.
l An assistant may help with step 7, if required.
Install remaining differential case (8) half over side gear (14) and compress springs (16). Install
8 differential case bolts (19) into differential case halves. Tighten bolts alternately to 70 Ib,-ft.