TRANSFER CASE MAINTENANCE (M1028A1 AND M1031) (Cont).
Right bolt (22) must be started first.
Install transfer case adapter (10) to transmission support (19) with 2 spacers (20), lower
transmission mounts (21 ), and bolts (22), Tighten bolts to 40 lb.-ft. (54 N.m).
Install new transfer case adapter gasket (16) to transfer case (1), alining bolt holes.
Transfer case (1) is heavy, Provide suitable support and use caution
during installation. Failure to follow this warning may result in damage to
transfer case or serious injury to personnel.
Install two 3/8 in, N.C. bolts, with heads cut off, in transfer case (1) to serve as guide pins.
Place transfer case on a suitable jack and raise into position.