TRANSFER CASE MAINTENANCE (ALL EXCEPT M1028A1 AND M1031)
Apply a thin coat of petrolatum to
underside of pump housing (37) tabs
and install pump housing assembly to
extension housing (2).
Apply anaerobic sealant to mating
surface of extension housing (2) and
around bolt holes. Install extension
housing to rear case (43). Lightly tap
on extension housing to firmly seat
sealing compound to 4 bolts and
install, Tighten bolts to 25 Ib.-ft.
Apply gasket sealing compound to
detent bolt (36) and install poppet
(34), spring (35), and detent bolt to
bottom of front case (29). Tighten
bolt to 20 Ib.-ft, (27 Nom).