TRANSFER CASE MAINTENANCE (ALL EXCEPT M1028A1 AND M1031)
Transmission should be supported before removing transfer case adapter
(8). Failure to follow this caution may result in damage to transmission
case or engine mounts.
If transmission is to be removed, transmission should be supported with a
Raise transmission 1/2 in. (12.7 mm) and remove 6 bolts (6) and Iockwashers (7). Remove
transfer case adapter (8). Remove 2 upper transmission mounts (11) and 2 left transfer case
shield bolts (1 3). Discard Iockwashers,
Remove seal (9) from transfer case adapter (8) and discard.
Dry cleaning solvent P-D-680 is toxic and flammable. Always wear
protective goggles and gloves and use only in a well-ventilated area. Avoid
contact with skin, eyes, and clothes and DO NOT breathe vapors, DO NOT
use near open flame or excessive heat,
The solvents flash point is
100°F-138°F (38°C-590C). If you become dizzy while using cleaning
solvent, immediately get fresh air and medical help. If solvent contacts
eyes, immediately wash your eyes with water and get medical aid.
If fill plug and drainplugs are installed, remove.