TRANSMISSION FORWARD CLUTCH ASSEMBLY MAINTENANCE (Cont).
Install direct clutch hub (6) in forward
clutch assembly (2). Install snapring
Install forward clutch assembly (2) on oil pump (23)
Compressed air used to check operation of forward clutch assembly (2)
should never exceed 30 psi (207 kPa). Use only effective chip guarding
and personnel protective equipment (goggles/shield, gloves, etc.). Failure
to follow this warning may result in injury to personnel.
Check forward clutch assembly (2)
operation by applying air through
forward clutch passage in oil pump
(23), Forward clutch piston (16)
should actuate and move forward
Remove forward clutch assembly (2)
from oil pump (23) delivery sleeve.