TRANSMISSION OIL PUMP MAINTENANCE (Cont).
Bolts (7, 9, and11) are not the same length. Bolt Iength and position
should be marked for assembly.
4. Remove bolt (11), 2 bolts (9), and 2 bolts (7), and separate cover assembly (12) from pump
body (13) .
5. Mark drive gear (26) and driven gear
(27) for assembly in same position,
and remove from pump body (13).
C a r e s h o u l d b e t a k e n w h e n
removing pin (24) and plug (25)
from regulator bore. Failure to
follow this caution may result in
damage to regulator bore.
Remove pin (24) and plug (25) from
end of regulator bore.