TRANSMISSION CONTROL VALVE ASSEMBLY AND DETENT SOLENOID
All valves are under spring tension. Wear goggles and use caution during
removal of springs. Maintain pressure against valves while removing
retaining pins. Failure to follow this warning may result in injury to
Use caution to ensure that control valve assembly (3), valves, bushings,
and springs are not scratched, nicked, or gouged during disassembly.
Failure to follow this caution will result in transmission malfunction.
All components should be marked as they are disassembled so that they
may be properly assembled.
1. Position control valve assembly (3) so that oil passages are facing upward and front
accumulator pocket is toward you.
2. Remove manual valve (7).
3. Compress front accumulator
(17) and remove retaining ring
4. Remove front accumulator
(17) and spring (19).