5-3. VACUUM MODULATOR ASSEMBLY, VACUUM LINES, AND FILL TUBE ASSEMBLY REPLACEMENT (Cont)

5-3. VACUUM MODULATOR ASSEMBLY, VACUUM LINES, AND FILL TUBE ASSEMBLY REPLACEMENT (Cont) - TM-9-2320-289-34_373

/.25ton/TM-9-2320-289-34 CUCV Series Trucks at intermediate direct support and general support level Manual
Page Navigation
357

TM 9-2320-289-34 5-3. VACUUM MODULATOR ASSEMBLY, VACUUM LINES, AND FILL TUBE ASSEMBLY REPLACEMENT (Con’t). 9. Install bolt (22) securing fill tube assembly (15) to transmission (14). Install transmission fluid indicator (4). 10. Install modulator valve (10) in transmission (14) bore with stem end out. Install new “O” ring seal (9) and vacuum modulator assembly (8) with retainer (11) and bolt (12). Tighten bolt to 20 Ib.-ft. (27 N.m). 1 1 . Connect hose (13) to vacuum modulator assembly (8), TA50206 5-14

Privacy Statement
Press Release
Contact