FRONT WIRING HARNESS REPLACEMENT (Cont).
Connect blackout drive light connector (5) and horn capacitor connector (6).
Connect headlight connector (11 ), parking light connector (1 2), and marker light connector
(13). Install ground lead (8) with new starwasher (9), new Iockwasher (10), and bolt (7).
Route front wiring harness under washer solvent container (3) and tighten screws securing
washer solvent container.
Install front wiring harness (2) into clips along left fenderwell (4). Install front wiring harness
onto windshield washer hose with new tie-down straps.
Assemble front wiring harness (2) to fuse box connector. Connect fuse box connector (1) to
rear of fuse box and install bolt.