INSTRUMENT PANEL WIRING HARNESS AND EXTENSION REPLACEMENT
1 3 .
Disconnect extension wiring harness connector (43) from extension wiring harness (40).
Remove insulator (5), Unsnap clips along dash (6) and remove instrument panel wiring
harness. Remove blackout light relay (24) if damaged. If replacing instrument panel wiring
harness, remove hazard flasher and all fuses, and save for installation.
Remove 5 screws (45) from clamps (44), Unsnap extension wiring harness (40) clips from
frame (41). Disconnect ambulance body accessory connectors (42). Pull extension wiring
harness through grommet (46) into engine compartment to remove. Remove grommet if
If installing instrument panel extension wiring harness (40), perform
steps 1 and 4.
If Installing all except Ml1010 instrument panal wiring harness, perform
steps 2, 3, 5 through 8, and 10 through 16.
If installing M1010 instrument panel wiring harness, perform