REAR MAIN SEAL REPLACEMENT (Cont).
Ensure that main bearing cap (1) is tapped into place before installing
bolts. Failure to follow this caution may result in damage to main bearing
Inner bolts are longer than outer bolts.
9. Using soft-faced hammer, tap rear
main bearing cap (1) into place and
install with 2 inner bolts and outer
bolts. Tighten all bolts to 40 Ib,-ft.
(54 Nom). Evenly tighten inner bolts
again to 110 Ib.-ft. (149 N.m). Evenly
tighten outer bolts again to 100 Ib.-ft.
(136 N.m). Repeat for other main
l Install engine oil pump. (See paragraph 3-33)
3-1 13/(3-1 14 blank)