3-20. CAMSHAFT INSTALLATION (Cont).
Rotate camshaft (3) to aline camshaft sprocket key (9) with mark on engine block (4).
If new camshaft (3) was installed, ensure that engine oil filter and all
hydraulic valve lifters are replaced.
l Install vacuum pump, (See TM 9-2320-289-20)
l Install fuel pump. (See TM 9-2320-289-20)
l Install hydraulic valve lifters. (See paragraph 3-23)
l Install timing chain and sprockets. (See paragraph 3-21)
l Install new engine oil filter (if new camshaft was installed). (See TM 9-2320-289-20)
l Install engine, (See paragraph 3-29)