Table 2-1. Unit Level Preventive Maintenance Checks And Services for CUCV
Item To Be
a n d C V
Lubricate annually or 12,000 miles. Lu-
bricate tie-rod ends, connecting rods,
and kingpins at fittings. Original M1009
ball joints do not have zirc fittings and do
not require lubrication. If vehicle is being
driven off-road, in dust or mud, lubricate
every 3 months or 3,000 miles. Lubri-
cate with GAA.
Annually or every 12,000 miles,
cate shaft fittings with GAA.
Lubricate fittings annually or 12,000
miles with GAA. Use a needle point
greaser with a flex hose to inject grease
into CV joint fitting.