POWER STEERING PUMP, BELT, AND PULLEY REPLACEMENT (Cont).
Ensure that belt (1) tension is correct. A belt too loose or too tight can
cause damage to power steering pump (5) or belt.
Position belt (1) on pulleys. Rotate power steering pump (5) by placing a pry bar between engine
and bracket (4), and pulling pry bar toward power steering pump until belt appears tight. Tighten
adjusting nut (2) and adjusting bolts (7 and 12).
Using belt tensioning gage, check belt (1) tension. (See Appendix E)
Install air conditioner belt if removed. (See paragraph 3-35)
Install alternator belts if removed. (See paragraph 4-2 or 4-3)
Bleed power steering system. (See paragraph 8-8)