MASTER CYLINDER AND POWER BOOSTER REPLACEMENT (Cont).
An Installed M1009 master cylinder (4) will have larger reservoir facing
forward. On all other models, larger reservoir will be facing rearward when
installed. If incorrect master cylinder is installed, erratic braking action
may be experienced.
Position master cylinder (4) and power brake bracket (11) on power booster (5)
install with 2 new locknuts (12), Tighten locknuts to 35 Ib.-ft. (47 Nm).
Install gasket (3), cover (1), and cover bail (2) on master cylinder (4).
Connect front brake lines to master cylinder. (See paragraph 7-9)
Connect power booster rod to service brake pedal if disconnected. (See paragraph 7-12)
Connect power steering lines to power booster if disconnected. (See paragraph 8-14)
Bleed brake system. (See paragraph 7-6)
Bleed power steering system if hoses were disconnected. (See paragraph 8-8)