TAILLIGHT AND LAMP REPLACEMENT (M1010 AND M1031) (Cont).
Remove 2 nuts
model trucks, ground (14)
bolt and does not need to be
is connected to blackout light
disconnected for this task.
(16), Iockwashers (15), and ground (14). Discard Iockwashers.
On 1984 model trucks, blackout light mounting bracket (13) is not
attached to taillight mounting bracket (7).
Tag wiring harness leads for installation.
Remove nut (5) and Iockwasher (6). Remove and discard plastic ties if present. Unplug wiring
harness leads from wiring harness connector. Remove taillight housing (8) from taillight
mounting bracket (7) and blackout light mounting bracket (13). Discard Iockwasher.
Remove 2 nuts (4), screws (1), and Iockwashers (2). Remove taillight mounting bracket (7).