22-9.2. LEFT FRONT FLOOR PANEL R EPAIR (C nt'd )
c. Left Front Floor Panel Removal
Using a 0.187-in. drill bit, remove twenty-four rivets (3) from left front seat support (2) and left
front floor panel (1).
Position insert panel (5), with arrow facing down and toward front of vehicle, to underside of left
front floor panel (4) and align mount holes (6).
Using insert panel (5) as a template, scribe an outline (7) on left front floor panel (4).
Do not cut through front seat support when removing left front
floor panel section.
Using scribed outline marked in step 3, cut and remove floor panel (4).
Remove sharp edges and burrs on left front floor panel (1).
Remove adhesive residue and clean left front seat support (8).