3-23. ENGINE INSTALLATION (6.2 L AND 6.5 L [DETUNED]) (Cont'd)
Position modulator cable (41) through cable bracket (34) and install washer (35) and start front
mounting nut (36).
Ensure cable is clear of exhaust system or other sources of extreme
heat to prevent damage to equipment.
Do not tighten mounting nuts.
Pull modulator control rod (37) to the rear until stop is engaged and hold in position.
With modulator cable (41) in idle position (cable core is extended), adjust modulator mounting
nuts (36) and (40) until modulator control rod head (38) and spring clip (39) align.
Tighten mounting nuts (36) and (40) and recheck alignment. Readjust if alignment has changed.
Pull modulator cable core (33) outward and connect spring clip (39) to modulator control rod
Check modulator cable (41) for ease and smoothness of operation and ensure cable returns to the